Semi-Finished Lens Blank Buying Guide for Optical Labs

Clear optical lens sample prepared for product inspection.
Finished / SF

Semi-finished blanks are a supply relationship, not merely a less complete finished lens. The quotation must make the boundary between blank supply and the laboratory’s generation and finishing work clear.

A blank is specified by geometry and downstream use

For a laboratory buying blanks, the practical bill of materials includes material, design, nominal front-side curve or base-curve range, diameter, thickness reference, coating state and the powers or ADD range intended for the downstream process.

Do not request a finished-lens power grid

Semi-finished orders often do not carry the same finished SPH/CYL distribution as stock finished lenses. Provide the laboratory planning range and the required base curves instead. If both finished and SF items are needed, quote them separately.

How to compare diameters and base curves

Diameter and base curve are independent fields. The same diameter may be offered in multiple curves. A supplier should state the available combinations rather than answering only with one number.

Define who owns final inspection

Ask which properties are inspected before dispatch and which are created by the laboratory. Agree how defects, curve errors, coating concerns and transit damage are documented. This prevents the same issue from being blamed on two different production stages.

Keep evidence aligned with the format

A semi-finished report cannot be presented as proof that a finished prescription lens meets a finished-product standard. Likewise, a finished-lens report does not automatically cover every blank geometry.

RFQ checklist

  • Material and refractive index
  • Design: single vision, progressive or bifocal
  • Diameter and available base-curve combinations
  • Front-surface and thickness specification
  • ADD range and corridor requirement for multifocal blanks
  • Coating state and protected or unprotected surface
  • Inspection, packing, traceability and evidence scope

Continue the selection

Buyer questions

Why is the finished/SF distinction important?

The two formats have different geometry, ordering fields and responsibility for final power generation and inspection.

Does a finished-lens certificate cover an SF blank?

It should not be assumed. The report must state the article and scope, and the buyer should request confirmation from the testing body when coverage is unclear.

Can a blank carry a final SPH/CYL specification?

The blank specification should use the agreed geometry and planning range. Final prescription powers belong to the laboratory’s finished-lens process.

Need a quotation review?

Send the product family, Finished or SF format, power distribution, coating or colour, quantity, packing and destination. If a certificate, test report or material datasheet is required, state the exact document scope rather than asking only for “certificates”.

Start a structured RFQ