Progressive Lens Buying Checklist: ADD, Corridor and Fitting Height

Inspection area used for optical lens production.
Multifocal sourcing

Progressive lenses need more than an ADD value. The quotation should identify the design, corridor, intended fitting-height range, format and working range so the buyer and supplier know which product is being compared.

ADD, corridor and fitting height are different fields

ADD describes the near addition. Corridor describes the progressive transition length. Fitting height describes the vertical space required in the frame. Replacing one with another creates an incomplete specification.

Define the design before comparing price

Ask for the design name, corridor options, ADD range, distance and near-zone requirements, and the stock or custom boundary. If the design is developed for a specific market or frame, record that constraint.

Use a representative power and ADD distribution

Send the powers that are expected to dominate the order, plus the upper and lower planning limits. Include cylinder and any prism or frame-specific requirement. The supplier can then separate stock, made-to-order and out-of-range requests.

State Finished or SF explicitly

A finished progressive lens is supplied to the agreed prescription and processing boundary. A semi-finished progressive blank is used by the buyer’s laboratory to create the final surface. The documents, MOQ and lead time can differ.

Review sample fitting and physical labels

Use a sample to inspect markings, corridor geometry, near-zone shape and packing. Record the approved sample version and keep future production references tied to that version.

RFQ checklist

  • Design name and version
  • ADD range and representative ADD values
  • Corridor length and fitting-height range
  • Finished or semi-finished format
  • SPH/CYL distribution by volume
  • Frame or minimum-height restriction
  • Coating, tint, marking, packing and sample approval

Continue the selection

Buyer questions

Can progressive and bifocal lenses be quoted as one design?

No. Progressive lenses use a corridor and a continuous change; round-top and flat-top bifocals use a separate near segment.

Is ADD the same as the corridor?

No. ADD is the near power addition. Corridor is the progressive transition length.

Can I request only one corridor for every frame?

The frame’s fitting height and intended use may require a different corridor choice. Confirm the intended range with the approved design and laboratory.

Need a quotation review?

Send the product family, Finished or SF format, power distribution, coating or colour, quantity, packing and destination. If a certificate, test report or material datasheet is required, state the exact document scope rather than asking only for “certificates”.

Start a structured RFQ