Compare optical lens materials without confusing index with performance.
A higher refractive index can reduce edge thickness, but it is not automatically the better lens for every buyer. Use prescription distribution, frame size, coating, stock policy and target cost to choose the product family.
Product-family decision matrix
| Family | Best commercial role | Buyer value | What must be confirmed |
|---|---|---|---|
| 1.499 CR39 | Cost-led everyday single-vision stock | Broad routine supply and straightforward processing | Power range, diameter, coating, finished format |
| 1.56 resin | Mainstream single-vision platform | Practical balance of cost, thickness and program breadth | Exact material designation from TDS; coating and stock powers |
| 1.60 MR-8 | Balanced thin-and-light program | Transition from standard resin into a higher-index material | Finished or SF route, power range, coating and test scope |
| 1.67 MR-7 | Thinner lenses in moderate to high prescriptions | Improved edge-thickness profile and broad planning range | Combined power limits, diameter and lab-custom scope |
| 1.71 MR-174 | Premium thin-lens program | Low weight and thin-edge positioning in higher powers | Final Rx limits, material evidence, coating and order volume |
| 1.591 PC | Impact-oriented material applications | Lightweight polycarbonate option | Application, thickness, frame and finished-product test requirement |
Higher index is not automatically better
For low powers, a standard material may deliver the better cost-to-performance balance. Higher-index materials become more useful when edge thickness and weight are meaningful to the final eyewear.
Do not compare material brochures as if every product carries the same coating or test scope. Confirm the actual product family, format and report coverage.
Spec information to request
- Material TDS and supplier grade
- Refractive index and nominal design
- SPH, CYL and ADD limits
- Diameter and base-curve range
- Coating, tint and color
- Finished or semi-finished format
- Applicable test report and coverage
Buyer questions
Is a higher refractive index always the better lens?
No. A higher index can reduce edge thickness, but the best choice also depends on prescription, frame, coating, target price and stock policy.
Can different materials share one test report?
Do not assume that. The laboratory must confirm the representative sample and coverage rule in writing.
What should an RFQ include for material comparison?
Include the SPH/CYL distribution, frame requirement, coating, finished or semi-finished format, estimated volume and destination.
