For optical laboratories

A lens supply route built around lab specifications, not vague product names.

Optical laboratories need more than an index. They need the finished or blank format, base curve, diameter, thickness, design, ADD, coating and evidence scope to match the work performed downstream.

Separate the laboratory decision into four parts

1. Finished or unfinished

Finished lenses are supplied to the agreed power and treatment. Semi-finished blanks are defined by material, design, base curve, diameter, thickness and ADD where relevant.

2. The prescription population

Send the expected SPH/CYL distribution and annual volume. A nominal maximum power is not enough to judge stock depth, representative testing or production planning.

3. The treatment stack

Confirm hard coat, AR/HMC, hydrophobic layer, tint, photochromic or polarized requirements. A material family does not automatically carry the same coating.

4. The evidence packet

Match each requested document to the product family, material, design, format and representative specification. Do not infer coverage outside the report scope.

Lens families available for laboratory review

Family Common laboratory use What to specify
1.499 / 1.56 single vision Conventional Rx and stock-oriented programs Power range, diameter, coating, finished/SF
1.60 MR-8 / 1.67 MR-7 / 1.71 MR-174 Thinner prescriptions and high-index programs Material TDS, combined-power limits and representative test scope
Progressive Continuous distance-to-near correction Corridor, ADD, fitting height, design and stock/lab route
Round-top / flat-top bifocal Separate near-segment correction Segment shape, ADD, blank geometry and fitting requirement
1.591 PC Impact-oriented material applications Application, thickness, coating and finished-product test requirement
1.56 RX / 1.49 stock polarized Prescription and plano sunwear programs Color, VLT, polarizing construction, base curve and evidence

What to send with the first lab RFQ

  • Finished lens or semi-finished blank
  • Material and nominal index
  • Design and ADD
  • SPH, CYL and axis distribution
  • Base curve, diameter and thickness for blanks
  • Coating and tint
  • Annual and first-order quantity
  • Destination and required documents

What we will not guess

We will not infer that one report covers another material, design, coating or format. We will not describe a semi-finished blank as a finished prescription lens. Missing technical information remains open until the responsible product or quality contact confirms it.

Review the quality workflow

Buyer questions

Can an optical laboratory buy both finished lenses and blanks?

Yes, when the quotation clearly separates format, power or geometry and evidence scope.

What data should a laboratory send first?

Send the product families, expected SPH/CYL/ADD distribution, finished or semi-finished format, base curve or diameter demand, coating and annual volume.

Can ShenHai confirm the final laboratory process?

ShenHai can specify the supplied product. The laboratory remains responsible for downstream surfacing, edging, mounting and final-process controls unless another scope is agreed in writing.