A cost-led platform for routine single-vision supply.
Use 1.499 when the buyer needs a conventional stock programme with practical power coverage. Aspheric, blue-light, photochromic and polarized programme options are confirmed by the exact SKU.
A CR39 resin platform for routine prescription and plano lens programs. Stock powers, lens design and coating are confirmed against the final order rather than assumed from the product family name.

Representative lens image. Final material, coating, tint, base curve and appearance depend on the confirmed order specification.
Verified product essentials
| Refractive index | 1.499 |
| Material | CR39 resin |
| Design | Single vision; aspheric options subject to confirmation |
| Stock power | SPH +6.00 to -6.00; CYL -0.25 to -4.00 |
| Diameter | Plus-power stock commonly 60/65 mm; minus-power stock commonly 70/72 mm; confirm per SKU |
| Coatings | HC, HMC/AR and other available coating options confirmed by specification |
| Format | Finished lenses; semi-finished enquiries handled separately |
How to choose this product
Choose 1.499 CR39 for conventional single-vision supply where cost consistency, broad stock coverage and straightforward processing are more important than ultra-thin edges.
Specification boundaries
- Bifocal, progressive and other designs are quoted as separate configurations.
- Finished-lens performance must be matched to the tested product family.
- Special power ranges require confirmation before quotation.
Ordering, samples and packaging
MOQ
Typical mixed-order minimum is 100 pairs. Individual stocked powers commonly require around 50 pairs; availability is confirmed before order acceptance.
Samples
5–10 sample pairs can be offered free of product charge. The buyer pays freight or supplies a freight-collect account. Sample availability is confirmed by specification.
Packaging
Standard white packaging is available. Private-label and anti-counterfeit marking can be discussed subject to artwork, quantity and production approval.
Quality and evidence
ShenHai Optical manufactures at its Danyang production site and controls incoming material, production, optical inspection and packing checkpoints. Product-specific testing under the applicable ISO 8980 or ISO 10322 scope is confirmed on the quotation or report rather than inferred from the material alone.
See the quality-control workflow · View company and certification status
Buyer questions
Is the listed power range fully in stock?
The range shown is a supplied reference. Stock depth varies by power and coating; we confirm the available quantity before accepting an order.
Can I mix powers in one order?
A mixed order can be discussed, with a typical minimum order of 100 pairs and around 50 pairs per stocked power. Final rules are stated in the quotation.
How 1.499 fits a buyer program
1.499 CR39 is best understood as a conventional single-vision platform. It is normally selected for routine prescription coverage, straightforward processing and cost control. It is not a promise that every bifocal, progressive or functional design belongs to the same SKU.
Compare it with 1.56 before fixing the range
Both families can serve everyday demand, but the final choice should use the buyer’s power distribution, target retail price, coating, diameter and stock plan. Using a higher index everywhere can raise cost without improving the end product enough to justify it.
Sample evaluation
- Measure the actual power and cylinder against the order.
- Inspect surface quality under controlled light.
- Confirm tint or coating appearance.
- Check edge condition, diameter and markings.
- Compare packed quantity and labels with the approved brief.
Treatment options and claim boundaries
The current product file discusses anti-reflection, anti-radiation, super-hydrophobic, inner-coating, wear-resistant and HC hard-coat treatments, together with blue or green coating appearance and selected blue-light, photochromic or polarized programmes.
Confirm the exact stack for the ordered SKU
Availability depends on the material, lens design, coating supplier, production route and requested performance. A quotation should name the actual treatment rather than only saying “coated”.
Two claims that remain separate
A blue or green coating appearance does not automatically prove blue-light blocking. A material described as impact-oriented does not prove that every finished lens meets a particular impact standard. Each claim requires the matching specification, material data or product test.
More technical questions
Is 1.499 the same as 1.56?
No. They are different nominal material families. Confirm the supplier designation and data sheet for the exact product rather than treating the names as interchangeable.
Can I approve a sample by appearance alone?
No. The sample should also be checked for power, surface, edge condition, coating, markings and packing against the approved specification.
Check the related buying decisions
Documents and test evidence
Download the technical data sheet for this family, open the issued test report where one exists, and check the evidence matrix before you quote the product to your customer.
TDS
Technical data sheet · TDS-1499Specification, power reference, MOQ, samples, packing and Incoterm.Download PDF
EVI
Test status: not in Batch 1See the evidence matrix for what is covered and what is scheduled.Open evidence matrix
CAT
2026 product catalogueAll lens families, factory and packaging overview.Download PDF
No report in Batch 1. The 1.56 single-vision report cannot be applied to 1.499 because the material differs.





