Optical Lens RFQ Checklist for Distributors, Labs and Eyewear Brands

Clear optical lens sample prepared for product inspection.
Procurement guide

A quotation is only as useful as the brief behind it. This checklist turns a general request for “lens prices” into a specification that a supplier can cost, sample and confirm without guessing.

1. Start with the buying job, not only the product name

State whether you are buying finished lenses, semi-finished blanks or both. Name the buyer route: distributor, optical laboratory or eyewear brand. This changes the powers, geometry, packaging, documents and inspection requirements.

Buyer route Information to add first
Distributor Stock-power mix, replenishment plan, white-pack or branded packing, target carton configuration.
Optical laboratory Finished/SF boundary, base curve, diameter, design, coating route and downstream processing.
Eyewear brand Private-label artwork, sample approval, colour or coating standard, MOQ and repeat-order plan.

2. Define the lens family and format

Do not combine different materials or designs into one vague line. At minimum, separate the refractive-index family, optical design and format. A conventional single-vision item is not the same purchasing group as a progressive lens, and a finished lens is not a semi-finished blank.

Useful families include 1.499, 1.56 resin, 1.60 MR-8, 1.67 MR-7, 1.71 MR-174, progressive, round-top bifocal, flat-top bifocal and polycarbonate. The final material name should still be checked against the supplier datasheet.

3. Provide a real power distribution

A single price at one power does not represent a mixed order. Provide representative SPH/CYL combinations, axis rules if relevant, ADD for multifocal work, blank base curve, diameter and the expected quantity by power band. For a first quotation, an 80/20 estimate is better than no grid, but the final order should use the approved specification.

4. Separate colour, coating and performance claims

Colour is not a VLT value. A blue-looking coating is not proof of blue-light blocking. A material described as impact-oriented is not the same as a finished article tested to an impact standard. Put the requested claim, the required test method and the document scope on separate lines.

5. Make the commercial terms comparable

Ask for MOQ by actual power mix and format, sample quantity and freight responsibility, production and packing lead time, Incoterms and named port, payment terms, quotation validity and packing specification. A price without these terms is not yet a comparable offer.

RFQ checklist

  • Legal buyer and ship-to destination
  • Product family, material name and refractive index
  • Finished lens or semi-finished blank
  • SPH/CYL/ADD distribution and representative quantities
  • Diameter and base curve for blanks
  • Coating, colour and any VLT target
  • Packing, artwork and private-label requirements
  • MOQ, sample, lead time, Incoterm and required documents

Continue the selection

Buyer questions

Can one RFQ contain several product families?

Yes. Keep each family on a separate line and provide a power or geometry distribution for each one so the quotation can preserve different MOQs, lead times and evidence scopes.

Should I request a sample before an order?

A sample is useful for form, colour, coating appearance, packing and paperwork. It does not replace a representative production inspection or a product-specific test report.

Why does the destination matter?

It affects freight, import responsibility, documentation and market-specific compliance questions. State the destination country and port before asking for a final landed-cost estimate.

Need a quotation review?

Send the product family, Finished or SF format, power distribution, coating or colour, quantity, packing and destination. If a certificate, test report or material datasheet is required, state the exact document scope rather than asking only for “certificates”.

Start a structured RFQ