Specify progressive corridor, ADD and frame height as separate decisions.
A progressive lens has a distance zone, a changing corridor and a near zone. The corridor is not the ADD, and a shorter corridor is not automatically better. Optical laboratories and distributors need a matching design, fitting height, power range, material and finished or semi-finished format.
Three measurements buyers often mix together
| Item | What it controls | Why it matters | RFQ input |
|---|---|---|---|
| ADD | Additional plus power in the near zone | Sets the reading addition needed by the wearer | ADD range and step, commonly discussed from +0.50 to +3.50 in 0.25 steps |
| Corridor | Vertical transition from distance to near vision | Balances adaptation, usable zones and frame shape | Design name or corridor code, not only a millimeter number |
| Fitting height | Usable frame height and vertical position of the design | A frame that is too shallow can remove part of the near or distance zone | Frame box height and the laboratory’s fitting method |
Short and standard corridor directions
The current progressive product record discusses shorter and longer corridor configurations. A short corridor can be useful when the frame has limited vertical depth, while a longer design may be chosen when the fitting geometry and wearer needs support a broader transition.
Do not treat a number in a product title as proof of fitting height. Confirm the exact lens drawing or design code. Some progressive designs require approximately 35 mm or more of frame height; the real minimum belongs to the ordered design and fitting method.
Progressive RFQ checklist
- Finished lens or semi-finished blank
- Design name, corridor code and fitting method
- SPH, CYL and axis distribution
- ADD range and step
- Frame box height for finished-lens orders
- Material, index, diameter and coating
- Quantity, packing and destination
- Required test or material documents
Finished lenses and laboratory blanks need different briefs
What to evaluate in a progressive sample
Check the lens markings, design identity, distance and near power, ADD, corridor, surface quality, coating and edge condition. For a semi-finished blank, also record the base curve, diameter and centre thickness. The responsibility boundary changes when the buyer’s laboratory completes the final prescription.
Review the inspection workflow or review sample and ordering steps.
