Independent test evidence · Batch 1 · November 2026
Five ISO 8980 test reports. Names, numbers and scope you can check.
In November 2026, Danyang Shenhai Metal Materials Technology Co., Ltd. commissioned five finished-lens tests at the National Quality Inspection & Testing Centre for Ophthalmic Optics Products (Danyang). Every PDF below is the report as issued. The cards show which lens, standard, sample powers and dates each report covers — and what it does not cover.
5Issued reports
64Lens samples tested
5ISO 8980 parts covered
CNASL0619 accredited laboratory
A report library, not a certificate wall.
Most supplier websites show a logo and ask the buyer to trust it. A test report is more useful: it names the product, the standard clause, the sample size and the measured result. This page publishes the actual documents so a buyer, lab or distributor can read them before the first call.
Batch 1 covers one ISO 8980 part for each of five lens families. It is deliberately narrow. Where a family has not been tested yet, the matrix below says so instead of borrowing another product’s report.
Document control: the PDFs on this page are uncontrolled copies for buyer evaluation. For tenders, supplier onboarding or product registration, request a controlled copy through the RFQ; we will confirm the current revision, scope and holder before release.
Laboratory
National Quality Inspection & Testing Centre for Ophthalmic Optics Products (Danyang)
Danyang Inspection and Testing Center, Jiangsu, China
CNAS L0619 · ilac-MRA mutual recognition · CMA 23001034928. Reports are issued in English and carry the laboratory’s inspection seal.
Batch 1 reports
Five products, five standards, one report each. Click any report number to open the PDF.
Report5006ISO 8980-1:2017
PDF ↓
ISO 8980-1:2017 · Optical and dimensional requirements for single-vision lenses
1.56 resin single-vision lens
Material and surface quality, back-vertex power tolerance, prismatic power, dimensions and thickness.
- Report number
- (2026) wei song zi spectacles 5006
- Sample code
- YJWS20265006
- Sample size
- 16 lenses
- Powers tested
- 0.00D / −2.00D / −4.00D / −6.00D · Ø72 mm · t 1.20–2.20 mm
- Test date
- 2026-11-06
- Issued
- 2026-11-11
Result: pass Pass on all five test groups
What it provesThe 1.56 single-vision samples met the ISO 8980-1 optical and dimensional tolerances for the powers listed.
What it does not coverIt does not cover other indices, other designs, coatings or semi-finished blanks.
Report5007ISO 8980-2:2017
PDF ↓
ISO 8980-2:2017 · Power-variation lenses — progressive addition
1.56 progressive (power-variation) lens
Focal power tolerance, variation power, prismatic power, dimensions and thickness.
- Report number
- (2026) wei song zi spectacles 5007
- Sample code
- YJWS20265007
- Sample size
- 8 lenses
- Powers tested
- 0.00D ADD +2.50 / +3.00 · −1.50D ADD +2.75 · Ø70 mm
- Test date
- 2026-11-06
- Issued
- 2026-11-11
Result: pass Pass on all test groups
What it provesThe 1.56 progressive samples met the ISO 8980-2 requirements for focal power, variation power and prism.
What it does not coverIt does not cover every ADD/corridor combination, other materials or lab-surfaced blanks.
Report5004ISO 8980-3:2022
PDF ↓
ISO 8980-3:2022 · Transmittance specifications and test methods
1.60 MR-8 single-vision lens
Visible transmittance, UV-A/UV-B transmittance, traffic-signal recognition and daylight use.
- Report number
- (2026) wei song zi spectacles 5004
- Sample code
- YJWS20265004
- Sample size
- 16 lenses
- Powers tested
- 0.00D / −2.00D / −4.00D / −6.00D · Category 0
- Test date
- 2026-11-06 to 2026-11-09
- Issued
- 2026-11-11
Result: pass Pass — visible transmittance 95.9%, UV-A 0.0%, UV-B 0.0%
What it provesThe 1.60 samples transmitted 95.9% of visible light and 0.0% of the tested UV-A and UV-B ranges.
What it does not coverIt is a transmittance report, not an impact, coating-durability or prescription-accuracy report.
Report5005ISO 8980-4:2006
PDF ↓
ISO 8980-4:2006 · Anti-reflective coating specifications and test methods
1.67 MR-7 lens with anti-reflective coating
Coating durability (adhesion) and usable coated area.
- Report number
- (2026) wei song zi spectacles 5005
- Sample code
- YJWS20265005
- Sample size
- 16 lenses
- Powers tested
- 0.00D / −2.00D / −4.00D / −6.00D · Ø75 mm
- Test date
- 2026-11-09 to 2026-11-12
- Issued
- 2026-11-13
Result: pass Pass — durability and usable coated area
What it provesThe coated 1.67 samples passed the ISO 8980-4 adhesion check and the usable-diameter requirement.
What it does not coverIt does not test every coating stack, nor abrasion (ISO 8980-5) or optical power (ISO 8980-1).
Report5003ISO 8980-5:2005
PDF ↓
ISO 8980-5:2005 · Minimum requirements for surfaces claimed to be abrasion-resistant
1.71 MR-174 lens
Abrasion resistance of the coated surface.
- Report number
- (2026) wei song zi spectacles 5003
- Sample code
- YJWS20265003
- Sample size
- 8 lenses
- Powers tested
- 0.00D / −4.00D / −6.00D / −8.00D
- Test date
- 2026-11-10
- Issued
- 2026-11-11
Result: pass Pass — no visible wear or tear
What it provesThe tested 1.71 surfaces showed no visible abrasion after the standard test.
What it does not coverIt does not cover optical power, transmittance, impact resistance or other coating types.
Compliance matrix by lens family
Read this as a map of evidence, not a score. A dash means the family is not part of Batch 1 — not that it failed. Numbers link to the issued PDF.
| Lens family | 8980-1 Optical | 8980-2 Progressive | 8980-3 Transmittance | 8980-4 AR coating | 8980-5 Abrasion |
|---|
| 1.56 single-vision | 5006 | — | — | — | — |
|---|
| 1.56 progressive | — | 5007 | — | — | — |
|---|
| 1.60 MR-8 single-vision | — | — | 5004 | — | — |
|---|
| 1.67 MR-7 | — | — | — | 5005 | — |
|---|
| 1.71 MR-174 | — | — | — | — | 5003 |
|---|
| 1.499 CR39 | — | — | — | — | — |
|---|
| Round-top bifocal | — | — | — | — | — |
|---|
| Flat-top bifocal | — | — | — | — | — |
|---|
| 1.591 polycarbonate (PC) | — | — | — | — | — |
|---|
| 1.56 tinted / sun lens | — | — | — | — | — |
|---|
| Polarized (1.56 RX / 1.49 stock) | — | — | — | — | — |
|---|
Coverage is limited to the sample product, powers and clauses named in each report. Wider coverage requires written confirmation from the laboratory.
What Batch 1 does not claim
Open gaps, stated plainly
- ISO 9001 — implementation in progress; no certificate is claimed or displayed.
- Polycarbonate impact — no finished-lens impact report yet. The site describes PC as a material choice, not as a certified impact product.
- Polarized performance — no polarization or VLT report in Batch 1; the polarized page is a product-direction page, not a performance claim.
- 1.499, bifocal, tinted and PC optical performance — not in Batch 1; these families are scheduled for a later testing round.
- CE, FDA and local registration — not claimed. The route depends on product classification and destination.
How to read a lens test report
1. Check the part, not just “ISO 8980”
Part 1 covers optical and dimensional tolerances, Part 2 progressive power variation, Part 3 transmittance, Part 4 anti-reflective coatings and Part 5 abrasion. A report for one part does not prove the others.
2. Match the sample to your order
Look at the material, index, design, power range, diameter and coating named in the report. If your SKU differs, ask for a coverage statement before you rely on it.
3. Separate finished and semi-finished
Finished-lens reports under ISO 8980 do not automatically cover semi-finished blanks. Blank geometry and downstream processing are a different scope.
Read the finished vs semi-finished boundary →
Buyer questions
Does one report cover every power you sell?
No. Each report names the sample powers and the standard clause tested. Any wider coverage must be confirmed by the laboratory in the report itself or in a written coverage statement.
Can we use these reports in a tender or product registration?
You can reference the issued report and verify it with the laboratory. Registration and market access remain the responsibility of the importing or legal entity in the destination country.
Why is there no impact test for polycarbonate yet?
Impact performance of a finished lens depends on material, thickness, design and processing. Material data alone is not a finished-lens impact result, so no impact claim is published until a finished-lens test is completed.
Is ShenHai ISO 9001 certified?
ISO 9001 implementation is in progress and no certificate is claimed on this website. The legal entity, site and scope will be published only after an issued certificate can be checked.
How can a buyer verify a report?
Quote the report number and sample code to the issuing laboratory, or ask us for a controlled copy through the RFQ. The PDFs on this page are the reports as issued.
Why do the reports cover different products?
Batch 1 was designed to cover one ISO 8980 part per product family. That gives buyers a readable evidence set instead of one vague claim applied to every SKU.
Use the reports in your next RFQ
Tell us which report matters for your market.
Send the product family, the standard your customer or importer requires, the destination and the volume. We will return the matching report, the current test scope and a quotation for the exact specification.
Send RFQ WhatsApp
Page updated 2026-11-20 · Report batch issued 2026-11-11 to 2026-11-13 · Next update when Batch 2 is issued.